The SE-800 digital switchers come standard with analog inputs. The SE-800DV model includes DV inputs and output plus an SDI overlay for use with a character generator that uses a down stream keyer (such as our CG-100). Additionally all SE-800s include an internal audio mixer with both mic and line level audio inputs. All SE-800s have voice sync to slew the voice relative to the image adjusting from "Audio Advanced" to "Audio Delayed". This works in all formats, including DV. All SE-800's include built-in format converters so each source may be seen with a composite video monitor.
SE-800s are supported with a family of accessories including monitor holders, shipping cases and mobile studios as well as compatible products, such as intercoms, character generators, and more.
SE-800 Features
SE-800AV I/O
4 inputs in composite, component and S-Video
Program outputs in composite, component and S-Video
SE-800DV I/O
4 inputs in DV, composite, component, and S-Video
Program outputs in SDI, DV, composite, component and S-Video
SDI overlay for graphics or character generators
Monitor outputs: one composite output for each input via included composite video format converters
Next source preview and tally - optional with RMC-140 accessory
No genlock required - frame synchronizer and TBC built-in for each active source for flicker-free switching
Voice sync - audio advanced to audio delayed, +3/-19 frames
Audio I/O:
Input: unbalanced, 4 sources (A, B, C, D), Aux 1, Aux 2, stereo and microphone inputs
Output: unbalanced, two main stereo ouputs, 1 stereo microphone output
Joystick control can be used for either RGB color correction (white balance corrections) or position the PIP or Mosaic effect
PIP - two fixed sizes
Color processor - white balance for each input. Last settings saved at power up
Digital effects - 15 transitions plus border, six speeds, pus six special effects
Easy titling with Datavideo CG-100 Character Generator.
SDI graphics overlay - use any SDI-based character generator with DSK (Down Stream Keyer). SE-800DV has SDI overlay built-in, SE-800AV requires upgrade card.
Four tally outputs - requires RMC-140 accessory with red/yellow tally lights
GPI input trigger controls up to 30 pre-programmed effects in sequence
Headphone monitor
RS-232 remote control interface
|
PDF Datasheet
