OTHER PRODUCTS
YOU MAY LIKE:
|
|
|
|
|
Audio-Technica
AT3032
|
|
|
|
Part number: AT3032
GG Product ID: 74
|
MSRP: $259
Our Price: $169
Availability:
1 In Stock
Save with combined shipping when ordering multiple items!
|
|
|
|
|
The AT3032 is intended for use in professional applications where remote power is available.It requires 11V to 52V DC phantom power, which may be provided by a mixer or console, or by a separate, in-line source such as the Audio-Technica AT8801 single-channel or CP8506 four-channel phantom power supplies. Output from the microphone's XLRM-type connector is low impedance (Lo-Z) balanced.The signal appears across Pins 2 and 3;Pin 1 is ground (shield).Output phase is “Pin 2 hot”– positive acoustic pressure produces positive voltage at Pin 2. To avoid phase cancellation and poor sound, all mic cables must be wired consistently:Pin 1-to-Pin 1, etc. An integral 80 Hz hi-pass filter provides easy switching from a flat frequency response to a low-end roll-off.The roll-off position reduces the microphone’s sensitivity to popping in close vocal use. It also reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically-coupled vibrations.
- Outstanding performance and
versatility
- High SPL handling and wide dynamic range
- Flat, extended frequency response
- Switchable 80 Hz hi-pass filter and 10 dB
pad
- Omnidirectional polar pattern provides maximum ambient pickup
|
|
|
DISCLAIMER: Every effort has been made to ensure the accuracy of all information posted on our websites. Due to the vast amount of information on our website, occasionally information is incorrect and therefore cannot be guanteed. Product names and model numbers are used for the purpose of identification. Please consult with us or the manufacturer if you need to confirm description or specification.
|
|
