OTHER PRODUCTS
YOU MAY LIKE:
|
|
|
|
|
M-Audio
Delta 1010-LT
|
|
|
|
Part number: US41077
GG Product ID: 631
|
MSRP: $250
Our Price: $194
Availability:
In Stock
Save with combined shipping when ordering multiple items!
|
|
Check out our
dedicated site at:
buyavid.com
|
|
Sound quality, performance, and superior driver technology are a few of the reasons that Delta audio cards have established worldwide recognition as a top choice in PCI-based digital audio solutions.
The Delta 1010-LT has what you need:
10 ins and 10 outs
XLR Microphone inputs with pre amps
S/PDIF i/o,MIDI i/o,wordclock i/o
24-bit 96 kHz recording
Convenient and powerful routing possibilities
Unsurpassed fidelity
Superior driver technology
The broadest compatibility of any card
Zero latency hardware monitoring
Bit-for-bit accurate digital transfers via
S/PDIF
Powerful digital mixing and routing.
Control over SCMS (Serial Copy Management System).
Why the 1010-LT?
The Delta 1010-LT offers all of the interface features you need to record music on your computer, including: eight analog inputs and outputs, including 2 XLR microphone inputs with pre amps, S/PDIF in/out, MIDI in/out, and wordclock in/out. Audio from a variety of sources can be connected to the 1010-LT inputs, and the comprehensive Delta Control Panel software can set and even fine-tune the input line level. Inputs 1 & 2 on XLR jacks can be set to receive a balanced line or a mic level signal, eliminating the need for an outboard mic preamp. The S/PDIF input will interface with gear from pro DAT players to CD, DVD or Minidisc, and offers control over the SCMS copy protection protocol.
The Delta 1010-LT outputs can be connected to an external mixer or sound system, while the S/PDIF outs feed your digital mixdown deck. The Delta Control Panel Software also controls a hardware mixer embedded in the PCI card, giving still more routing and mixing control. Use the MIDI I/O for your MIDI controllers and sound modules, and finally, connect to wordclock capable devices for rock-solid sample clock synchronization.
The 1010-LT is part of the Delta series of PCI audio cards, and benefits from years of development and research. No other audio interfaces on the market compete with the sound quality and driver compatibility of the Delta series. Install it in your MAC or PC computer today and begin exploring the world of professional digital audio.
Delta 1010-LT Specs:
10 in /10 out 24bit 96kHz audio card with mic preamps,digital i/o,MIDI i/o and more
10x10 24-bit/96khz full-duplex recording interface. PCI host card with 2 external, color-coded breakout cables.
8x8 analog I/O, balanced on female XLR and unbalanced on gold-plated RCA connectors, with signal level adjustments selectable within the Delta Control Panel.
S/PDIF digital I/O supports a variety of modes, including AC3 or DTS surround (PC only) and copy protection schemes can be set via the Delta Control Panel.
1x1 MIDI I/O on standard DIN jacks.
External synchronization via word Clock I/O on BNC connectors.
The two balanced XLR analog inputs can be set via hardware jumpers to accept microphone level or line level signals.
High dynamic range (A-weighted measured): D/A 101.5 dB, A/D 99.6 dB.
Low distortion (measured THD @ 0dBFS): A/D and D/A less than 0.002%.
Frequency Response: 22-22kHz, -0.2,-0.4dB @48kHz; 22-40kHz, -0.2,-0.7dB @96kHz
All data paths support up to 24bit/96kHz performance, no upgrades necessary.
Comprehensive digital mixing, routing, and monitoring capabilities with included Delta Control Panel software.
Hardware sample-accurate sync will allow linking of multiple Delta units.
Windows XP, 2000/ME and 95/98 multi-card, multi-client drivers with ASIO1 and ASIO2 multi-card, GSIF and EASI drivers included; Windows NT multi-card drivers also included.
Macintosh control panel and drivers with ASIO1, ASIO2, and legacy ASIO support for OS 8.6 or higher including OS X.
|
|
|
DISCLAIMER: Every effort has been made to ensure the accuracy of all information posted on our websites. Due to the vast amount of information on our website, occasionally information is incorrect and therefore cannot be guanteed. Product names and model numbers are used for the purpose of identification. Please consult with us or the manufacturer if you need to confirm description or specification.
|
|
