OTHER PRODUCTS
YOU MAY LIKE:
|
|
|
|
|
AKG
C 568 EB
|
|
|
|
|
The AKG C 569EB acheives a high degree of directivity and an exceptionally wide frquency response. This combination of features makes the C 568 EB ideal for high quality distant micing applications in theater, sound reinforcement, recording, film, and video.
Due to its compact and lightweight design, the C 568 EB is ideal for camera mount applications. The C 568 EB is an electret condenser design which operates on both pressure gradient and interference principles. Below 500 Hz it functions as a hypercardioid microphone; above 500 Hz the acoustic interference tube introduces increasing directivity. A switch selectable 12 dB/octave 150 Hz roll-off filter effectively suppresses rumble and wind noise. Robust, all-metal housing contains the built-in preamp/ impedance converter. Phantom powering (9-52 V) required; foam windscreen and stand adapter included.
Features:
- Polar patterns: hypercardioid/directional
- Frequency range: 20­20,000 Hz
- Sensitivity: 11 mV/Pa (-39 dBV)
- Max. SPL for 0.5 % THD: 128 dB
- Equivalent noise level: 18 dB-A
- Signal/noise ratio (A weighted): 76 dB
- Bass cut filter: 12 dB/octave at 120 Hz
- Electrical impedance: 600 ohm
- Recommended load impedance: >2,000 ohm
- Power requirement: 9 to 52 V phantom power
- Current consumption: <2 mA
- Connector: 3-pin male XLR
- Finish: matte black
- Size: dia.: 20 mm (0.8 in.); length: 255 mm (10 in.)
- Standard accessories: SA 40, W 68
|
|
|
DISCLAIMER: Every effort has been made to ensure the accuracy of all information posted on our websites. Due to the vast amount of information on our website, occasionally information is incorrect and therefore cannot be guanteed. Product names and model numbers are used for the purpose of identification. Please consult with us or the manufacturer if you need to confirm description or specification.
|
|
